Eagle Mountain Foundation Pros logoEagle Mountain Foundation ProsFoundation Repair · Eagle Mountain, UT
Foundation Crack Repair photo

Eagle Mountain Foundation Pros

Foundation Crack Repair in Eagle Mountain, UT

Foundation crack repair in Eagle Mountain, UT with epoxy and polyurethane injection, free inspection before any work is scheduled.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Eagle Mountain and nearby communities.

Most Eagle Mountain homes were built in the last ten to fifteen years, and that's exactly the window when settlement cracks start showing up in basement walls and slabs. A hairline vertical crack is usually just the house settling into Utah Valley's clay-and-sand bench soil. A diagonal or widening crack is a different story, and the difference matters before anyone reaches for a tube of epoxy.

Eagle Mountain Foundation Pros checks crack direction, width, and movement before recommending a repair method, injecting epoxy for structural cracks or hydrophobic polyurethane foam where water intrusion is the bigger concern.

What's included

What's included with Foundation Crack Repair

Optional Customer prep

  • Typically included — Crack assessment and classification -.
  • Injection port installation — Epoxy or polyurethane injection - Surface finishing to blend the repair.
  • Exterior sealant for additional water protection
  • Monitoring plan for cracks still showing minor movement
  • Follow-up check if the crack reopens
  • Clear access to the crack from inside or outside
  • Take dated photos if you've been watching the crack
  • Note any recent changes (doors sticking, new gaps at corners)

How it works

How our Foundation Crack Repair process works

  1. Crack Inspection photo
    Step 1

    Crack Inspection

    Technician examines the crack for type, width, and direction of movement.

  2. Surface Cleaning photo
    Step 2

    Surface Cleaning

    Loose debris and old sealant are cleared from the crack area.

  3. Injection Port Setup photo
    Step 3

    Injection Port Setup

    Small ports are set along the crack length for controlled filling.

  4. Sealant Injection photo
    Step 4

    Sealant Injection

    Epoxy or polyurethane is injected to bond or seal the crack fully.

  5. Surface Finishing photo
    Step 5

    Surface Finishing

    Excess material is scraped and the surface is smoothed flush.

  6. Final Inspection photo
    Step 6

    Final Inspection

    The seal is checked for a watertight, stable finish.

Materials

Materials and methods for Foundation Crack Repair

Eagle Mountain's newer housing stock is just reaching the age where settlement cracks appear, so we stock both structural and waterproofing injection options.

  • Epoxy Injection Resin photo

    Epoxy Injection Resin

    Bonds a structural crack back together so the wall carries load the way it was designed to, used when the crack isn't actively leaking.

  • Polyurethane Foam Sealant photo

    Polyurethane Foam Sealant

    Expands into the crack and blocks water, the better call when spring runoff is pushing moisture through.

  • Injection Ports photo

    Injection Ports

    Spaced along the crack so sealant reaches the full depth, not just the visible surface.

  • Surface Primer photo

    Surface Primer

    Preps the concrete so the injected material actually bonds instead of sitting on top.

  • Masonry Patch Compound photo

    Masonry Patch Compound

    Blends the repaired line into the surrounding wall or slab finish.

  • Protective Topcoat photo

    Protective Topcoat

    Shields the repair from the moisture swings that come with Utah Valley's wet springs.

Timeline

How long does a Foundation Crack Repair take?

Most crack injection jobs finish in a single visit unless there are multiple cracks to treat.

  1. 01

    Inspection

    same day
  2. 02

    Injection and sealing

    2–4 hours

    per crack

  3. 03

    Surface finish

    same visit

  4. 04

    Cure time before load

    24 hours

Need a schedule that fits?

Get a Free Estimate

Before & after

Before and after Foundation Crack Repair results

  • Foundation Crack Repair photo
    Before
  • Foundation Crack Repair photo
    After

FAQs

Foundation Crack Repair FAQs

Do I need to worry about hairline cracks or just the diagonal ones?

Hairline vertical cracks are common in newer homes settling into place and usually just need monitoring or a simple seal. Diagonal or stair-step cracks mean the foundation is shifting unevenly and need a closer look before they're sealed over.

Can I fill a foundation crack myself with epoxy or do I need a pro?

A hardware-store epoxy kit can work on a stable hairline crack. If the crack is widening, leaking, or running diagonally, sealing it without checking for underlying movement just hides the real problem.

How much does foundation crack repair cost in Eagle Mountain?

Most single-crack injection jobs run a few hundred to just over a thousand dollars depending on length and material. We give you an exact number after looking at the crack in person.

Does crack injection stop water from coming through?

Polyurethane foam is built for that specifically. Epoxy bonds the crack structurally but isn't always the best standalone waterproofing choice if active leaking is the main issue.

Do I need a permit to fix a foundation crack?

Minor crack injection is typically non-structural and doesn't need a permit. If the crack is tied to a larger settlement issue needing piering, that part of the job may.

When should I call a pro instead of watching the crack?

If the crack is diagonal, wider than a pencil line, or growing between seasons, get it looked at rather than waiting another year.

Next step

Get a Foundation Crack Repair estimate in Eagle Mountain

Call (435) 296-4086 or request a free estimate. We'll tell you straight whether it's a watch-it crack or a fix-it-now crack.

Ask about Foundation Crack Repair

Tell us about the project and how to reach you.

Call (435) 296-4086